A reminder that while the original dosage may be higher, the PPM will drop as the ClO2 addresses contaminants in the water. The EPA recommends 0.8 PPM as safe for consumption. If you have any concerns, we recommend purchasing chlorine dioxide test strips. Low range test strips that test from 1–10 PPM are ideal for checking potability.
Hi there,
We at the Safrax Family regret that we are unable to comment on the internal use of ClO2 except for water purification.
Depending on the level of contamination of your original water source, the recommended concentration will vary. You can find our data sheet on water purification here: https://safrax.com/wp-content/uploads/Safrax-Clo2-Water-Purification.pdf
A reminder that while the original dosage may be higher, the PPM will drop as the ClO2 addresses contaminants in the water. The EPA recommends 0.8 PPM as safe for consumption. If you have any concerns, we recommend purchasing chlorine dioxide test strips. Low range test strips that test from 1–10 PPM are ideal for checking potability.
Warm regards,
KT
Safrax.com