All three products (ODOR-CLO2, DISIN-CLO2, SPA-CLO2) are identical.
The only difference is in the labeling, which has been designed to cater to various marketing requirements and comply with specific regulations in certain regions.
Please see the Safrax Water Purification guide for dosage:
Our ClO2 is approved for water purification for consumption by the WHO at 1 to 5 PPM. There are no residuals except salt, which is consumable. If you can still taste it at low concentrations, double check your calculations to ensure you have indeed achieved a low enough concentration for consumption. Alternatively, after purifying the water, allow it to be exposed to sunlight, which will degrade any ClO2 that is still active.
Hi there! Apologies for the delayed reply.
All three products (ODOR-CLO2, DISIN-CLO2, SPA-CLO2) are identical.
The only difference is in the labeling, which has been designed to cater to various marketing requirements and comply with specific regulations in certain regions.
Please see the Safrax Water Purification guide for dosage:
https://safrax.com/wp-content/uploads/Safrax-Clo2-Water-Purification.pdf
Our ClO2 is approved for water purification for consumption by the WHO at 1 to 5 PPM. There are no residuals except salt, which is consumable. If you can still taste it at low concentrations, double check your calculations to ensure you have indeed achieved a low enough concentration for consumption. Alternatively, after purifying the water, allow it to be exposed to sunlight, which will degrade any ClO2 that is still active.